Material guide
201, 304 and 316 stainless steel: where to begin
A structured comparison to discuss grade selection with project conditions in mind.
Read technical guide →Technical Resources
Stainless Steel Procurement Guides: Grades, Finishes and Specifications
Practical starting points to prepare your RFQ for grade selection, surface finishes, tolerances, and export protection. Specifications verified per order.
- GOST ↔ AISI
- Accurate Grade Equivalence
- MTC EN 10204 3.1
- Mill Test Certifications
- Sea Packaging
- Moisture & Ocean Freight Protection
International standards, MTC 3.1 and logistics
Finish guide
Mirror, hairline and water ripple surfaces
Understand the visual and handling considerations behind common decorative finishes.
Explore finishes →Export guide
Preparing stainless steel for sea freight
Key product and route details to discuss when defining protective export packaging.
Explore export planning →Resource library in preparation
Detailed guides, finish catalogues and verified project material will be added as they are reviewed and approved for publication.
Knowledge library
Procurement & project guides
Practical starting points for preparing a technical enquiry.
What Is PVD Coating on Stainless Steel?
Read the guide →How to Choose a Stainless Steel Finish
Read the guide →How to Prepare Stainless Steel for Sea Freight
Read the guide →Stainless Steel Slitting: What to Confirm
Read the guide →How to Prepare Drawings for Laser Cutting & Bending
Read the guide →Stainless Steel Export Packaging Guide
Read the guide →Procurement, processing & delivery
Practical guides for preparing an enquiry
These guides help state requirements. They are not technical, legal or logistics opinions.
Procurement enquiry
How to Write a Stainless Steel RFQ
A checklist for coil, sheet, strip, tube or drawing-based stainless steel enquiries.
Read technical guide →Grade selection
AISI 304 and 304L: What to Confirm Before Procurement
A practical list of questions about grade, standard, product form and intended use.
Read technical guide →Coil and strip
How to Choose Stainless Steel Coil for Slitting
The coil characteristics that affect slit-strip quotation and downstream processing.
Read technical guide →Surface protection
Protective Film for Decorative Stainless Steel
How to describe surface-protection requirements before processing, packing and delivery.
Read technical guide →PVD and samples
PVD Colour: Sample Approval Checklist
The points to record when discussing colour and finish without ambiguity.
Read technical guide →Commercial interiors
Stainless Steel Sheet for Elevators and Commercial Interiors
Questions about finish, panel size, protection and installation processing for decorative sheet.
Read technical guide →Perforation
How to Specify a Perforated Stainless Steel Panel
The data needed to discuss perforation, panel format and subsequent processing.
Read technical guide →Trim profiles
How to Measure a Stainless Steel Trim Profile
The dimensions and installation conditions needed for a decorative profile enquiry.
Read technical guide →Tube procurement
How to Prepare a Welded or Decorative Tube Order
A checklist for section, size, finish, length and downstream processing requirements.
Read technical guide →Material documents
Which Material Documents to Request for Stainless Steel
How to describe document, identification and inspection needs without unsupported promises.
Read technical guide →Acceptance
Stainless Steel and Fabricated Parts Acceptance Checklist
How to define acceptance criteria for material, finish, dimensions and completeness.
Read technical guide →Delivery planning
Delivery Point and Incoterms in a Metal RFQ
Why a delivery point and commercial conditions should be discussed before routing a quotation.
Read technical guide →Enquiry preparation centre
Collect technical and delivery information in one place.
RFQ checklist, documents, packing and delivery point—without unsupported promises.
Additional guides
Russia-destination questions
Practical topics for preparing a destination-specific enquiry and confirming a decorative finish.
Delivery and route
How to Prepare Russia Delivery-Point Information for a Metal RFQ
The city, terminal, unloading, surface-protection and route details that help prepare a stainless steel enquiry for a Russian destination.
Read technical guide →Sample and finish
How to Confirm a Stainless Steel Sample and Finish Before Ordering
A checklist for recording appearance, base material, grinding direction, sample size and face-side protection before placing a stainless steel order.
Read technical guide →Practical questions
Specification, processing and delivery preparation
Focused practical topics for preparing a material, processing and cargo-protection enquiry.
Supply format
How to Choose Coil, Sheet or Strip Stainless Steel Supply
How to connect supply form with downstream cutting, bending, stamping, storage and surface-protection needs.
Read technical guide →Dimensions and tolerances
How to Specify Stainless Steel Dimensions and Tolerances
A practical order for describing thickness, width, length, flatness and critical dimensions before an offer is prepared.
Read technical guide →Edge and burr control
How to Specify Edge Condition and Burr Control
The edge, burr and downstream-process details to state before metal processing or supply.
Read technical guide →Decorative-surface processing
How to Protect Decorative Stainless Steel During Cutting and Bending
What to state before processing mirror, brushed, textured or PVD surfaces so face-side protection can be discussed.
Read technical guide →Quotation preparation
What Information Affects a Stainless Steel Quotation
The technical and logistics information that helps prepare a clear enquiry without promising price or timing.
Read technical guide →Sample and batch
Small Batch, Sample and Production Order Checklist
The points that differ when preparing an enquiry for a sample, small batch or repeat production supply.
Read technical guide →Visual acceptance
Decorative Stainless Steel Visual Acceptance Checklist
How to state checkable requirements for the face side, colour, finish direction, protective film and approved sample reference.
Read technical guide →Inland logistics
How to Describe Stainless Steel Protection During Multiple Handling in Russia
Practical enquiry data for cargo that may pass through a warehouse, terminal, handling stage or inland delivery before reaching the site.
Read technical guide →